Bootmgr is Missing in Windows 7

This is one of the most common boot issue you might come around, in the Windows operating system. In this article I will tell you how you can fix the Bootmgr is Missing error message in Windows 7

Step 1:

Insert the Windows 7 Installation or Repair disk into your drive and reboot the System. You will be prompted to “Press any key to boot from disk” so go ahead and press Enter.

Step 2:

Then it will give you language selection option click Next.


Step 3:

You will now get the option to “Repair your Computer“.












Step 4:

Select Repair your computer option and the Operating System i.e. Windows 7 next. Click Next.

On some occasions you may not find any operating system listed. Don’t panic just click Next!
Step 5:

Now click on “Command Prompt“.


Step 6:

Type in the following commands:

bootrec /fixboot
bootrec /fixmbr
bootrec /RebuildBCD

Sometime you may need to change the directory from X:\Windows\System to C:\ type in the command cd\ then c: then run the commands.

Once you finish running those commands, reboot the system and see if it boots. It should! If not then run Startup Repair 3 different times.

Read more »

Tabs And Windows Firefox Home

Why weren't my tabs and windows restored?

If you had tabs and windows open when you closed Firefox, the new default Firefox home page will have a Restore Previous Session button on it. To get your tabs and windows back, just click it. Restore Previous Session - Win1
If you don't use the default Firefox home page, you can restore your tabs and windows from the History menu:

At the top of the Firefox window, click the Firefox button, go over to History (History menu in Windows XP) and select Restore Previous Session. Restore Previous Session - Win2

For more info about how session restore works, see Session Restore and Firefox does not ask to save tabs and windows on exit.
Why are the menus (File, Edit, View, etc.) missing?

If you're using Windows 7 or Windows Vista, you now have an orange Firefox button that takes the most common functions and puts them in one menu.

To temporarily show the old style menus, just press the Alt key.
To have them shown all the time, right-click on an empty section of the Tab Strip and check Menu Bar in the pop-up menu.
Menu Bar - Win

How do I get the orange Firefox button?

If you're using Windows XP or you've customized your toolbars, you can switch to using the orange Firefox button by:

Right-clicking on an empty section of the Tab Strip and unchecking Menu Bar in the pop-up menu.

See Menu bar is missing for problems with the Menu bar and check out How do I customize the toolbars? for more about arranging Firefox to fit your needs.
What happened to the back, refresh and home buttons?

To streamline the navigation section and group buttons by task, a few things have changed:

The back button drop-down menu can be accessed by clicking and holding on the back button.
The stop and refresh buttons are combined into one button on the right end of the location bar.
The home button is to the right of the location bar.

Nav Buttons - Win
Not crazy about this arrangement? No problem. It's your browser, make Firefox work the way you do. See How do I customize the toolbars? for more about customizing buttons and toolbars.

Right-click on an empty section of the Tab Strip, select Customize... and the Customize Toolbar window will open.
Drag, drop and rearrange items.
To add an item to a toolbar, drag it from the Customize Toolbar window onto the toolbar where you want it to appear.
To remove an item from a toolbar, drag it to the Customize Toolbar window.
To move an item in a toolbar, drag it where you want it to appear.
When you are finished making changes, click Done to close the Customize Toolbar window.

Custom Buttons - Win
What happened to the Status Bar?

The Status Bar at the bottom of the Firefox window has changed. The new Status Bar only shows page loading activity and link previews. When neither of those are needed it simply disappears. Please see What happened to the Status Bar? for more.
Status Bar link - win
Status Bar load - win
Why do my fonts look blurry?

If you are using Windows Vista or Windows 7, text in Firefox may appear blurry. This is usually due to Windows ClearType not being turned on.

In Windows, click Small Vista Logo and type cleartype in the search box.
Click Adjust ClearType text to open the ClearType control panel.
Check Turn on ClearType and then Next to fine tune your settings.
After you fine tune the ClearType settings, click Finish to accept them.

For more details see, Fonts look blurry. It's also possible that you are also experiencing issues related to outdated graphics card drivers. See How do I upgrade my graphics drivers? for more information, including how to disable hardware acceleration in Firefox as a possible workaround.
Some of my add-ons were disabled. What can I do?

After upgrading, Firefox checks for new versions of your add-ons and disables those that are no longer compatible. By default it will continue to check for new versions periodically. For more info, see Add-ons are disabled after updating Firefox.

Some add-ons (like Firebug) have completely different versions for new versions of Firefox so the auto-update feature won't work. To check for a new version:

At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP), and then click Add-ons. The Add-ons Manager tab will open.
In the Add-ons Manager tab, select the Extensions panel.
Click the more link in the add-on's description.
In the detail view, click the homepage link to be taken to the add-on's website where you can search for a newer version.

Where are my bookmarks?

Relax. If you were using the Bookmarks Toolbar to hold your favorite sites you may just have to turn it back on:

Right-click on an empty section of the Tab Strip and check Bookmarks Toolbar in the pop-up menu.
Bookmarks Toolbar - Win

You can also view and organize your bookmarks in the Library window.

Click the Bookmarks button Bookmarks button win 2 on the right side of the navigation toolbar (Windows XP: click the Bookmarks menu) and select Show All Bookmarks to open the Library window.

Bookmarks Button win

For more about using bookmarks, including tagging and organizing, see How do I use bookmarks?
Why are tabs on top of the location bar now?

The main reason is that it just makes more sense — especially with features like App Tabs and the Add-ons Manager. For details on this change, see Why are tabs on top?
How do I put tabs back like they used to be?

Right-click on an empty section of the Tab Strip and uncheck Tabs on Top in the pop-up menu.

Read more »

Preparing To Configure Windows. Please Do Not Turn Off Your Computer

I just bought a Toshiba Laptop for a Client with windows 7 home,

As a favour for my clients I usually run windows update for them so they get it all working and are 100% confident that when they get it as up to date as possible,

I ran into the exact same problem as above, i read this thread and read all different reply's but none of them realy worked for me and i didnt have time to wait...

this is what worked for me:

1. Hold down the power button and switch of your machine
2. Restart your computer and just before windows boots hit the F8 button
3. Boot into safe mode
4. login (if nessecary)
5. Make sure that any virus scanners at this point are disabled before continuing
6. Click "Start" > "Accessories" > "System Restore"
7. Click "Next"
8. Pick an earlier restore point and then click next, (its best to pick the 1 just before you had problems)
9. Click next and follow the prompts and it will start a system restore
10. wait till your computer does this System Restore process
11. Regardless of whether the system restore process fails or passes it should now get you out being stuck at "Preparing To Configure Windows. Please Do Not Turn Off Your Computer."

Now...

12. login if required
13 Disable Virus Scanner before moving on
14. Run windows update
15. now it should run without any problems

16. if you do have problems and run into a loop Call your Computer Manufacturer or the company that you purchased it off and see if they can help you,

Read more »

Error 646 while installing updates

Issue Summary:

We are aware of a potential issue you may encounter with recent Office Security updates. When installing these updates, the Windows Update control panel returns the error 646 or 0x80070646.



Technical Details:

The error 0x80070646 or 646 is an MSI installer error that will only occur when the updates are installed via the Windows Update control Panel. Previous workaround to resolve the immediate problem requires the installation of the update from a standalone package from the Microsoft Download Center. We do not recommend this workaround.



If Windows Installer logging is enabled, the following line should be noted as a symptom:



Error 1606. Could not access network location %APPDATA%\







Cause:

The problem is potentially a result of an inconsistent/incorrect environmental variable (%AppData%) as shown below:





Solution:

1. Open the Registry editor. To do so, Click Start, type regedit in the Start Search box, and then click regedit.exe in the Programs list.In the User Account Control dialog box, click Continue.



2. Navigate to the following registry keysHKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders



3. The correct and default value forAppData should be %USERPROFILE%\AppData\Roaming. To change the value, double click on Appdata, then change the string in the value data field.





4. Close the Registry editor, and try again Windows Update again. (A reboot shouldnot be required.)



5. If the problem persists, repeat the steps 2 through 4 with the following registry keys:

· HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\

· HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\

Read more »

Troubleshoot problems installing Windows 7 Service Pack 1

When installing a service pack for Windows 7 or Windows Server 2008 R2 you might get an "Installation was not successful" error message. The most common causes of this problem are:

An inconsistency in the Windows Servicing Store. The Windows Servicing Store is a feature that is required to successfully install the service packs.

A program on your computer, such as an antivirus or antispyware program, is interfering with the installation of the service pack.

To solve this problem, try to install the service pack again

Read more »

Update re-offers KB 2566220/2532531 after I’ve already installed it

After you install this security update, you may be prompted to install the security update again when you scan the system by using Windows Update or Microsoft Update.
This issue may occur if you installed this security update, but you have not installed update 2552343. To resolve this issue, install update KB2552343 using Windows Update or Microsoft Update.

Read more »

No sound after update Windows : Sound Aufzeichnen Spielen

windows update u. sound stellt sich ab. Soundcard Zoom r 16
Ich lösche das Windowsupdate, also uhr zurückgehen, dann funktioniert die Soundcard wieder
- english. Windows update, than noch sound anymore . soundcard zoom r16
When I delete the windows update, than i can hear again. Help

Which updates were installed?

Run the Microsoft fix it “Diagnose and repair sound playback problems automatically “: http://support.microsoft.com/mats/no_sound

Also here is some online help on the topic: http://windows.microsoft.com/en-us/windows7/Tips-for-fixing-common-sound-problems

Read more »

Error code 66A while trying to install update KB2446708

Net 4 update problems
I am trying to install the .net 4 update (KB2446708) for Vista, it gives me error code 66A. I have tried to Repair the .net Framework Client Profile and it comes back with Not Suceeded because of a GenericTrust Failure.I have tried to reset the Windows Update Components using the fix it tool. What shall I try next??

see if this helps fix it:

How do I reset Windows Update components?

there is an automatic "fix-it" there too

http://support.microsoft.com/kb/971058

Also, try putting the KB numbers in the search at the below link then manually download them

http://www.microsoft.com/downloads/en/default.aspx

Read more »

The task image is corrupt or has been tampered

In order to fix this, you have to delete the actual task XML file that contains the task settings,
then rerun the Task Scheduler to confirm that the error is gone, then import a non-corrupted version of the task back into the Task Scheduler.
Most of the work you have to do is to locate the task file in question.
The task files are located in C:\Windows\System32\Tasks.
If you try to open the task folder, you might get a UAC prompt asking you for permission to access the folder, this is OK, just click continue to access the folder.
In my case, the corrupt task was "Microsoft-Windows-DiskDiagnosticDataCollector".
This was a Microsoft task, therefore I had to go into the C:\Windows\System32\Tasks\Microsoft\Windows\DiskDiagnostic folder to locate the actual task xml file,
which was named "Microsoft-Windows-DiskDiagnosticDataCollector".

Once you have located the task file, close the task scheduler, back up the corrupted task file to any location of your choice, then delete it, then open the task scheduler to confirm that the error has gone.

What you now need to do is to export the non-corrupted task from another computer or virtual machine, and import it into the task scheduler.
To export the task in question from another computer, follow these steps.

1. Open the Task Scheduler, then drill down into the task in question, then right-click on the task and select "Export...".
2. Save the exported XML file to a location of your choosing, then copy it over to the affected computer.
3. Once you are back on the affected computer, make sure that the task scheduler is closed, then you need to run the task scheduler as an Administrator.
4. To run the task scheduler as an Administrator, click Start>All Programs>Accessories>System Tools, then locate "Task Scheduler", right-click it and select "Run as Administrator".
5. Once the task scheduler is open, drill down to the folder where the task is supposed to be located, right-click on a blank portion of the window, and select "Import Task...".
6. Once you have imported the task, a "Create task" window will open as shown below, just click OK to it.
7. The task should then be successfully imported, you can then close the task scheduler, and the problem should be fully resolved.

Read more »

The specified domain either does not exist or could not be contacted

You can get one from purchasing a legal retail copy of Vista and
creating one from the installation DVD on another computer since you do not have a DVD drive, or purchase a subscription to TechNet and download the Vista ISO file.

What did you use previously to install Vista with on your computer? Could you not use the same?

Read more »

Stub has stopped working Error message

Can you do the following for me please?
OTL
Download OTL to your desktop.
Double click on the icon to run it. Make sure all other windows are closed to let it run uninterrupted.
When the window appears, underneath Output at the top change it to Minimal Output.
Under the Standard Registry box change it to All.
Check the boxes beside LOP Check and Purity Check.
Click the Run Scan button. Do not change any settings unless otherwise told to do so. The scan wont take long.
When the scan completes, it will open two notepad windows. OTL.Txt and Extras.Txt. These are saved in the same location as OTL.
Please copy (Edit->Select All, Edit->Copy) the contents of these files, one at a time, and post it with your next reply.

CKScanner

Please download CKScanner from here to your Desktop.

Make sure that CKScanner.exe is on the your Desktop before running the application!

Double-click on CKScanner.exe and click Search For Files.
After a very short time, when the cursor hourglass disappears, click Save List To File.
A message box will verify the file saved
CKFiles.txt will be created on your desktop, copy and paste the contents of this into your next post

Malwarebytes Anti-Malware

Download and install MBAM from here
Run a full scan

Read more »

Black screen F8 key unresponsive Can't reboot

The drive is easy to put in.
1 - remove the AC Adapter and battery
2 - open up the case over the hard drive (usually 1 or 2 screws)
3 - lift up on the plastic tab to remove the hard drive
4 - remove the adapter over the SATA/IDE connector (it pulls off)
5 - unscrew 4 screws to remove the drive from the "caddy"
6 - reassemble in reverse.
Since the old drive is bad, you'll definitely need a set of recovery disks. If you don't have them now, you'll have to order them from the link I gave earlier (If in the USA). They usually arrive in a couple of days and it'll take a couple of hours to install.

Turn the computer on, open the CD/DVD drive and put Disk 1 in. Close the drive
Restart the system, tapping Esc as soon as the Compaq splash screen shows up.
Select the CD/DVD drive to boot from - and follow the prompts.

Here's a link to the product manual. Chapter 4 deals with replacing the hard drive: http://h10032.www1.hp.com/ctg/Manual/c01523646.pdf

Read more »

C00D1199 Error message Problem

Error Message C00D1199
So I made a big mistake.

I got a Flip Video Camera for my birthday. Woot. I could watch the videos with no problem. So I got motivated. I was trying to use the mpeg videos it produces in WMM. I downloaded a codec package, and now I can't watch the originals. I unistalled the darn package, and no change.

The error message I'm getting is C00D1199. From what I can find it's a broad error code for a variety of problems. Can anyone help me?

Ok, there are several way which you could try. The first of which, is installing codecs:

Free-Codecs.com : Download K-Lite Codec Pack 6.1.0 FULL, K-Lite Codec Pack 6.1.0 STANDARD, K-Lite Codec Pack 6.1.0 BASIC : K-Lite Codec Pack is a collection of codecs and related tools

If you download and install this (I would use the full version). Then you should be able to import .mp4 files into WMM and merge them together.

Read more »

Troubleshooting Error Code 10 Fix

Windows 7 Error code 10 is an error that shows on all Windows systems when you either have a driver error, or some other problem with the hardware of your system. Even though this error is continually being shown randomly on your PC, it's got a set list of causes which need to be fixed in order to get rid of the problem for good. This tutorial is going to show you how to fix error code 10 on a Windows 7 system. Here's what you need to do...

The Error code 10 error that forms on Windows 7 will typically show in this format:

Troubleshooting Error Code 10 Fix

This device cannot start. (Code 10)

The cause of the code 10 error on Windows 7 is all down to the way in which your computer is trying to use the hardware it has. The hardware of your PC are all the components you can touch, including the keyboard, hard drives and other peripherals. In order for Windows to work well with these components, it needs to be able to use "drivers" - small software applications which allow your system to use the various hardware components of your PC. The problem you're seeing is either caused by a faulty driver (which stops Windows working with your hardware), or from damaged parts of your Windows system. If you want to fix the error, you need to be able to repair all possible problems that first causes it to show.

To fix the Windows 7 error 10 on your PC, you need to first update all the drivers which may be faulty or damaged on your system. To do this, you should click onto Start > Control Panel > Device Manager, and then look for any hardware icons that have a small yellow exclamation mark by them. This will basically show you that there is a problem with the specific hardware component on your PC, and will allow you to update the driver for it. After that, you should also update Windows to its latest version, which can be done by clicking Start > All Programs > Windows Update. This will basically allow your computer to upgrade to the latest version, which should incorporate some fixes for the Windows 7 error code 10 problem.

It's also recommended that you use what's known as a "registry cleaner" program. This is a type of software that's designed to scan through your PC and fix any errors that are inside the registry database of Windows. The registry database is essentially a central storage center for all the files, settings and options that your computer needs to use each day, and is what lies at the core of every Windows system. Unfortunately, the registry is one of the biggest causes of errors on your computer, and needs to be constantly fixed to ensure it's not leading your PC to run slower or with errors. To do this, you should download a registry cleaner program from the Internet and then let it scan your PC. It will identify any possible errors inside your computer, and then fix the ones that are causing problems. This will often solve a variety of errors, and has been known to cure the Windows 7 error code 10 as well.

Read more »

Fix error audio service is not running

Recently when I rebooted my computer, the audio stopped running. Usually, troubleshooter will automatically fix the problem, but surprisingly in this occasion, even the troubleshooter failed to start. The speaker icon in the notification area had a red cross over it.
Here’s a work around:

1. Click on Start, and type Services.msc in the search bar.

2. Scroll through the list of services, right click on Windows Audio and click Start.

If this doesn’t work, make sure, you have started all other dependent services such as Plug and Play, Multimedia Class Scheduler, Windows Audio Endpoint Builder

Read more »

Cannot load the device driver for this hardware

If you experience Windows Error 42 then be sure that now your operating system is facing some kind of danger that is important to take in control as soon as possible otherwise you will encounter slow and degraded system performance, blue screen problem and even system crash. So resolve this error message or you will experience many other kind of lose.

Causes of this error are:

Main reason behind this error is faulty or incompatible device driver, this generally gets encountered when your system do not correctly process the settings that are initially required by the hardware to run. Some other reasons are Spyware attack, Registry problem, improper installation or uninstallation of any program, file corruption etc.

So in order to resolve the error message you can use manual steps but sometimes even manual steps fail to resolve the error message. So the need to get complete solution arises as how to fix error problem completely.

Read more »

Error Messages : How To Repair Windows Errors

There can be many causes for the error codes on your system. It can be causes by a viruses, malware, spyware, adware or simply a corrupt application. Sometimes, it can be caused by installing a new application without completely removing a conflicting application. This can cause registry corruption or data file corruption or mis-linked files.

Paretologic Regcure offers a state of the art registry cleaner. Running this scan is a excellent way to clean your PC of junk entries and maintain running at its fastest.
What's the windows registry?

The registry holds all the information that windows needs to operate your system. It's a huge database of pointers to all the files that applications need. It tracks all the devices attached to the system as well as the proper files they need to operate. .
Why would the registry need to be cleaned?

Error Messages : How To Repair Windows Errors

As you use your computer over time, deleting files, changing hardware, adding and removing applications, the registry could have a lot of entries that are invalid. This can cause your system to slow down while it loads the registry hives and tries to find everything that it's pointing to. It's kinda like a car with a clogged fuel filter and the gas has to find it's way to the engine.
What do I do to clean the registry?

When you launch a scan with Regcure, it automatically hunts down all the invalid entries in the registry and any other eroneous entries that can be removed. The process is so simple even a novice computer user can operate the appliaction. Once it finds all over the entries you can either remove everything it finds, or you can choose entries to have it remove.
Is there a way to do this manually?

You can remove registry entries manually, but you'd need the necessary expertise to do so. It would be very time consuming even for an advanced PC technician. You also run the risk of removing entries that render your system unbootable. That's never fun!

You should also note that by using Windows Add/Remove tool, very rarely does it remove all the files and registry entries on the system. The fragments it leaves behind can cause problems with future applications and can cause errors and blue screens. We recommend using a third party tool called Perfect Uninstaller to completely remove applications and never leave behind fragments of files or registry entries.
If something is accidently deleted?

Just like other applications, Regcure can make a backup of your registy and set a restore point on your system that allows you to launch the System Restore utility and go back to the same point that you were at the time.

If you're unsure how to launch the System Restore Utility, follow these steps:

You should click on the Start Button, then choose "All Programs"
Next Click on Accessories, System Tools, and choose System Restore.
Choose to restore to an earlier date.
Once you've chosen the restore point, choose Next. (your system will restart and go to an earlier time)

How often should I run Regcure?

You should run Regcure at least once a month or as soon as you begin to see problems or slowness on your system.

Read more »

Mozilla crash reporter keeps popping up

Mozilla crash reporter keeps popping up

Mozilla crash reporter keeps popping up

The Mozilla Crash Reporter is a program that sends information to Firefox developers when Firefox crashes. Firefox developers use this information to make future versions of Firefox crash less frequently.

The Mozilla Crash Reporter comes up because Firefox crashes; it does not cause Firefox to crash. For suggestions on how to prevent Firefox from crashing, see Firefox crashes.
Tell Mozilla about this crash so they can fix it: If this box is checked, the Mozilla Crash Reporter will send a summary of the crash to Mozilla. Deselect this box if you don't want to send the report to Mozilla.

Mozilla crash reporter keeps popping up

Will open the "Report Contents" window, where you can view the technical details of the crash.

Add a comment (comments are publicly visible): Use this box to add any further information that might be useful to developers trying to find the cause of the crash. The comments you post may be read by anyone..

Include the address of the page I was on: When checked, the information you send to Mozilla will include the website you visited before the crash.

Email me when more information is available: Check this box if you would be willing to receive emails from the development staff should they need followup information from you about this crash.
Note: Mozilla will NOT e-mail you back unless more information is requested about your crash.

Enter your email address here: If you chose to help our development staff get information and reproduce this crash, provide the email address you wish to be contacted at here.

Quit Firefox: Close the dialog and don't start Firefox again.

Restart Firefox: Start Firefox again. Firefox will give you the option to open the windows and tabs you had open before the crash. If you crash again after choosing to restore your windows and tabs, one of the pages you were on is causing the crash. In this case, choose Start new session.

Read more »

Disable Debugging script and runtime errors in Internet Explorer

I thought I’d take a couple minutes to talk about Script Debugging and Internet Explorer.

Script debugging is turned off by default you can enable it by going to:
Tools->Internet Options…->Advanced->Disable Script Debugging

Prior to XPSP2 the above will turn script debugging on for all applications that host the WebBrowser control (Outlook for example).

On XPSP2 we’ve split the option into two:
Tools->Internet Options…->Advanced->Disable Script Debugging (Internet Explorer)
Tools->Internet Options…->Advanced->Disable Script Debugging (Other)

When you’ve enabled Script Debugging ‘View->Script Debugger’ will now be present to help you break into the debugger.

The debugger statement can also be placed anywhere in your code to suspend execution this is similar to setting a breakpoint.
The Stop statement is the VBScript version of JScript’s debugger statement.

There are three applications which I’ve used for script debugging. One is Visual Studio.Net, the second is Microsoft Script Debugger and the third is Microsoft Script Editor:

Miscrosoft Script Debugger:
You can obtain a copy of the Microsoft Script Debugger here:
http://www.microsoft.com/downloads/details.aspx?FamilyID=2f465be0-94fd-4569-b3c4-dffdf19ccd99&displaylang=en

The main MSDN page for using the Microsoft Script Debugger can be found here:
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/sdbug/Html/sdbug_1.asp

The Microsoft Script debugger allows you to debug client side and server side scripts and provides the same functionality as most debuggers do.

Directions on using the Microsoft Script debugger can be found here:
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/sdbug/Html/sdbug_2.asp

Microsoft Script Editor:
The Microsoft Script Editor comes free with Microsoft Office XP/2003 with FrontPage.
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnfp2k2/html/odc_fpdebugscripts.asp

Visual Studio.net:
For Visual Studio.net debugging Monica Rosculet has written an excellent article on: Debugging Script Code Using Visual Studio.

Other:
Gregg Miskelly a developer on the Visual Studio team has posted some excellent information about: How Script Debugging Works.
Disable Debugging script and runtime errors in Internet Explorer

Disable Debugging script and runtime errors in Internet Explorer

Are you getting annoying messages such as "A Runtime Error has occurred. Do you wish to Debug?" or "Internet Explorer Script Error. An error has occurred in the script on line 1. Do you wish to continue running scripts on this page?"

There are three reasons why these problems occur. The first is that the web page author made some programming error. The second reason may be that you are running a pop-up killer that closes pop-up windows so fast that the script on the web page fails. The third is that you might have some adware or spyware installed on your computer that opens the script error pop-ups.

How to disable script and runtime errors
You can configure Internet Explorer to ignore these script and runtime errors. Please follow this step-by-step guide:

1. Open Internet Explorer.

2. Click on Tools, then on Internet Options.

3. Click on the Advanced tab.

4. Look for the "Disable script debugging" line and put a check mark in the box.

5. Now look for the "Display a notification about every script error" line and remove the check mark in the box.

Read more »

Internet explorer error script troubleshoot javascript errors

A Web page may not display or work correctly, and you may receive an error message that resembles the following error messages:

Internet explorer error script troubleshoot javascript errors

Problems with this Web page might prevent it from being displayed properly or functioning properly. In the future you can display this message by double-clicking the warning icon displayed in the Status Bar.
If you click Show Details, error details that resemble the following may appear:
Line: 4
Char: 1
Error: Object doesn't support this property or method.
Code: 0
URL: http://Webserver/page.htm
A Runtime Error has occured.
Do you wish to Debug?
Line: 4
Error: Object doesn't support this property or method.
The following warning message may also appear in the Microsoft Internet Explorer Status bar:
Done, but with errors on page.

If you receive a script error while trying to print a webpage in Internet Explorer, go to the "To resolve script errors when trying to print in Internet Explorer"

Read more »